Dickson Max 1.2m


Technical Specifications

ValueStandards
Composition: 100% solution dyed acrylic
Finish: Permaclean special self-cleaning and water-resistant treatment.
Width: 120 cm
Weight: 320gsm
Thickness: 0.7mm
Schmerber (Water Column): >1200mm
Spray Test: 5/5
Colour Fastness UV outdoor: 4-5/5
Warranty: 10 year limited
Made in France
Care and cleaning: Max is treated with a special finish which delays the forming and accumulation of dirt. In order not to spoil this treatment, cleaning of the fabric must be done respecting the following instructions. Simply brush off any loose dirt, dust, grime, leaf litter and bird matter with a soft brush, hose down and clean with a mild soap in lukewarm water (37ºC). Rinse thoroughly to remove soap. DO NOT use detergents. Allow to air dry. For our complete cleaning guide and available cleaning products such as 303 then please contact us. *** Respect the following to prolong the life of your awning *** *** Do not allow dirt, dust, grime, leaf litter and bird matter to remain on the fabric as this can stain your fabric and can provides a perfect medium for bacteria to proliferate. *** The awning system should be positioned in such a way that there is perfect tension of the fabric with no rubbing. *** In the event of high winds, retract the awning *** In the rain, the awning can be left out, but avoid retracting it damp and leaving it for a long period of time. If for different reasons, you must retract it when damp, let it out as soon as you can to allow it to dry.
  • Features
  • UV resistant 4-5/5 - ISO 105 B04
  • Water and stain resistant
  • Protects against UV rays and heat
  • Tear resistant
  • Mould resistant
  • Easy to maintain

The technology used in the development of the Permaclean self-cleaning finish is based on the observation of the structure of a Lotus leaf, which, despite its development in muddy rivers and lakes, manages to keep clean. The microscopic structure of the plant surface, covered with numerous superhydrophobic small bumps, allows its leaves never to be wet. Instead, the drops of water keep rolling on the surface of the leaf, carrying with them debris, insects and dust. Therefore, the Permaclean finish contains nanoparticles that, once applied on the fabric, assemble to form an extremely dense protective layer that keeps dirt on the surface. Rain or simple rinsing is sufficient to clean the fabric. Dickson Max is coated on one side with an anti-fungal, UV resistant acrylic resin, reinforcing its extremely high water-resistant properties.

Plain

0001 White
U409 Marble
6088 Grey
6196 Stone
8396 Lead Chine
U104 Flanelle
8203 Slate
U171 Carbone
6028 Black
U387 Clay
6020 Raw
7133 Natural
0681 Dune
8779 Heather Chine
7559 Taupe
U224 Brownie
U413 Pumpkin
3914 Red
8206 Burgundy
6687 Forest green
7264 Ocean blue
U415 Maize

Stripes

** Values for the metallic side exposed
to the exterior.